BG电子

PJH-规格：见技术参数/PJH- specifications: Technical parameters attached

用途：适用于工模具钢、高速钢、不锈钢等材料的淬火后回火处理；不锈钢、钛及钛合金、有色金属等材料的固溶后时效处理；有色金属的再结晶时效处理

Application: It is Suitable for quenching and tempering treatment of die steel, high speed steel, stainless steel and other materials; solid solution post-aging treatment of stainless steel, titanium and titanium alloys, non-ferrous metals, etc.; recrystallizing aging treatment of non-ferrous metals。

特点 /characteristic：

加热元件采用多区控温布置，温度均匀性达±3℃

The heating element is arranged by multi-zone temperature control, and the temperature uniformity is up to ±3 ℃.

1.  采用金属屏为加热室隔热层

Using metal screen as heat insulation layer of heating chamber.

2.  对流风机搅拌循环，加热时间短，热效率高

The mixing cycle of countercurrent fan is short in heating time and high in thermal efficiency.。

3.  编程工艺灵活输入，机械动作稳定可靠，故障自动报警/显示

Flexible input of programming process, stable and reliable mechanical action, automatic alarm / display of fault.

4.  风机变频驱动、九点测温

Fan frequency conversion drive, nine point temperature measurements。　　

5.  全智能化工业计算机控制系统并有一套手动操作系统

Fully intelligent chemical industry computer control system and a manual operating system。

6.  操作简洁、编程工艺灵活输入、机械动作稳定可靠

Simple operation, flexible input of programming process, stable and reliable mechanical action.

7.  手动/半自动/自动 故障自动报警/显示

Manual/ semi-automatic/ automatic fault automatic alarm/ display.

配置选择/Configure select:

产品 规格/ Specifications：

注：特殊规格要求可根据客户要求定制

Note: Special specification requirements can be customized according to customer requirements

以下参数可根据工艺要求调整，不作为验收依据，具体以技术方案和协议为准

The following parameters may be adjusted according to the process requirements and shall not be used as the basis for acceptance, depending on the technical scheme and agreement.