BG电子

规格：见技术参数 /Specification:  Technical parameters attached

适用于高合金工具钢、模具钢、轴承钢、高速钢、电工磁性材料、有色金属、不锈钢及精密合金材料的光亮退火、时效硬化处理；有色金属的再结晶时效处理

It is suitable for bright annealing and aging hardening of high alloy tool steel, die steel, bearing steel, high speed steel, electrician magnetic material, non-ferrous metal, stainless steel and precision alloy material.。

特点 /characteristic：

1.  加热元件采用多区控温布置，温度均匀性达±3℃

The heating element is arranged by multi-zone temperature control, and the temperature uniformity is up to ±3 ℃.

2.  采用石墨毡/金属屏为加热室隔热层

Using graphite felt / metal screen as heat insulation layer in heating chamber.

3.  对流风机搅拌循环，加热时间短，热效率高

The mixing cycle of countercurrent fan is short in heating time and high in thermal efficiency.。

4.  编程工艺灵活输入，机械动作稳定可靠，故障自动报警/显示

Flexible input of programming process, stable and reliable mechanical action, automatic alarm / display of fault.

5.  风机变频驱动、热区九点测温

Fan frequency conversion drive, hot zone 9 temperature measurement。　　

6.  全智能化工业计算机控制系统并有一套手动操作系统

Fully intelligent chemical industry computer control system and a manual operating system。

7.  操作简洁、编程工艺灵活输入、机械动作稳定可靠

Simple operation, flexible input of programming process, stable and reliable mechanical action.

8.  手动/半自动/自动 故障自动报警/显示

Manual / semi-automatic / automatic fault automatic alarm / display.

配置选择/Configure select:

产品 规格/ Specifications：

注：特殊规格要求可根据客户要求定制

Note: Special specification requirements can be customized according to customer requirements

以下参数可根据工艺要求调整，不作为验收依据，具体以技术方案和协议为准

The following parameters may be adjusted according to the process requirements and shall not be used as the basis for acceptance, depending on the technical scheme and agreement