BG电子

规格：见技术参数 /Specification: Refer to technical parameters

用途：适用于工模具钢、高速钢、不锈钢等材料的淬火处理；不锈钢、钛及钛合金等材料的固溶处理；多种磁性材料的退火处理及回火处理；也可用于真空钎焊及真空烧结等

Application: It is suitable for quenching treatment of die steel, high speed steel, stainless steel and other materials; solid solution treatment of stainless steel, titanium and titanium alloy; annealing treatment and tempering treatment of various magnetic materials; can also be used for vacuum brazing and vacuum sintering, etc.

特点 /characteristic：

1.采用高效方形换热器，冷却速度提高80%

Using high efficiency square heat exchanger, the cooling rate is increased by 80%.

2.采用双风机对流均匀冷却

Uniform Convective cooling with double Fan。

3.加热元件沿加热室圆周360度均匀布置，温度均匀性高

The heating element is evenly arranged along the circle of the heating chamber at 360 degrees, and the temperature uniformity is high.

4.采用碳毡/金属屏为加热室隔热层，适用不同工艺环境

The carbon felt / metal screen is used as the heat insulation layer of the heating chamber, which is suitable for different process environments.

5.工件变形小，生产效率高，使用成本较单室气淬节能30%

The workpiece has the advantages of small deformation, high production efficiency and 30% energy saving compared with single chamber gas quenching.。

6. 编程工艺灵活输入，机械动作稳定可靠，故障自动报警/显示

Flexible input of programming process, stable and reliable mechanical action, automatic alarm / display of fault

7.气淬风机变频驱动，对流加热功能可选、九点测温可选

Frequency conversion drive of gas quenching fan, optional convective heating function, optional temperature measurement at nine points

8. 全智能化工业计算机控制系统并有一套手动操作系统

Fully intelligent chemical industry computer control system and a manual operating system。

9.操作简洁、编程工艺灵活输入、机械动作稳定可靠

Simple operation, flexible input of programming process, stable and reliable mechanical action

10.手动/半自动/自动 故障自动报警/显示

Manual / semi-automatic / automatic fault automatic alarm / display

配置选择/Configure select:

产品 规格/Specifications：

注：特殊规格要求可根据客户要求定制

Note: Special specification requirements can be customized according to customer requirements

以下参数可根据工艺要求调整，不作为验收依据，具体以技术方案和协议为准

The following parameters may be adjusted according to the process requirements and shall not be used as the basis for acceptance, depending on the technical scheme and agreement